External Label Un/Rewinder for labels, tickets and tags. The Un/Rewinder is designed for Un/Rewinding the labels as the printer feeds it. The Un/Rewinder is made for the Rewinder to stand in front of printer and the Unwinder for standing in back of printer. The Unwinder are fixed together with the printer to be sure that the Unwinder and the printer is always in line with the label input and guaranteeing a good result. The Rewinder unit is a "Stand Alone", in this case the rubber feet ensure that the Rewinder stands in its place. (If needed the Rewinder can also be fixed to the printer)
The Un/Rewinder is made for you to be able to run bigger rolls than the printer can contain or that you want to have control of the label rolls and you want to apply the labels manually or automatically later on. The Un/Rewinder can match the printers maximum speed. Un/Rewinding is done neatly and efficiently. Besides, it is a silent operation. By means of switches you can control rewinding direction and power on/off. The label web tension can easily be adjusted. The Un/Rewinder is synchronized with the printer, to be automatically stopped by tension arm. A tension plate on the bobbin shaft on the Rewinder unit is automatically suits bobbins having a diameter of 38-41mm. When no paper bobbin is used, the label web can be folded and fixed under the tension plate. No need for tape. The Unwinder can be loaded with label roll which has 3 inch core or 38-41mm core, by moving one of the shaft. Changing label roll on the Unwinder by just take of the old core and fit the new label roll, no need for tools or take of the stopper.
The Un/Rewinder(URW) are made in 2 different models. Different models can take label width size 125mm or 180mm, and label roll diameter size 225mm label core size 38 - 41mm or 75mm. For more "Heavy duty" operations you should consider the Heavy duty Un/Rewinder URW-4L which can take roll diameter of 360mm.